|
|
Rubbernek
Fittings (High pressure 3,450 - 6,750psi)
Features
- Rubbernek Design
- Leak resistant
- Rubber seal
- Ease of assembly
- Positive nut stop
- Special tube end preparation not required
- Zinc plated as standard other finishes as specified
Benefits
- Rubber seal compression reduces costly leaks
- Compensates for minor tube misalignment
- No pre-setting required
- Helps reduce noise, vibration and shock
- Need for torque measurement reduced by
 bottoming
nut design
|
Sealastic Fittings
(medium pressure 2,000 to 3,200psi)
Mini
Sealastic Fittings (low pressure 200 to
1,200psi)
For all fuel, air, oil, water, refrigerant and vacuum
lines
Features
- Reusable unlimited make/break capability
- Metal to metal or metal to plastic fastening
- Bottoming nut gives positive stop
- Elastic seal in Nitrile or Viton
- Vibration and Leakproof seal
- Zinc plated as standard other finishes as specified
- Seal compensates for tube misalignment
- Quick easy installation
- No tube preparation required
- Effective on all types of seamed or seamless
tubing
Steel, Copper
- Aluminum, Stainless Steel, Everdur, Plastic and
thin
wall Monel |
|
|
Special
Products
- A custom designed product
- Manufactured to individual application
- From your drawings or ours
- In the material of your choice
- Manufactured to recognise standards as set out
by
SAE, B.S, DIN, etc
- NPTF, BSPP, BSPT, UNF and Metric threads
|
Customised Fittings
- RFL Fittings can be produced by Steel forgings
or
brazed
assemblies, we can manufacture a large
range
of Steel, Stainless Steel and Brass fittings
with
NPTF, BSPP, BSPT, UNF and metric threaded
terminals
for uses in agricultural, mobile
equipment,
machine tools, powerpacks, or any
other
Hydraulic, Pneumatic fluid system world
wide
- Pick your components from our catalogue
- In the configuration you require
- Send us a fax or order the amount required
- Leave the rest to us |
|
|
'O'
Ring Face Seal (ORFS) (high pressure 4,000
- 6,000psi)
- Special captive groove design to retain
the 'O'
ring
- Steel or Stainless Steel construction
- Manufactured to SAE - J1453 specifications
- ORFS fittings in Steel and stainless steel are suitable
for wide range of tube dimensions and
wall
thickness
- Designed for use with metric and imperial tubing,
or
to suit your specific requirements
- Can be supplied with or without an O ring in
Nitrile
or Viton® |
37
°, 45 ° Inverted Flare Fittings (JIC)
- Manufactured to SAE standards and specifications
- J 512 - Inverted flare
- J 513 - 45 ° Flare
- J 514 - 37 ° Flare |
|
|
Hose
Push - On Fittings (Low pressure)
- Manufactured to your design
- Material Brass, Steel, Stainless Steel
- Brazed to BS 1723
- These fittings are intended for low pressure
general
applications and suit all fluid power or
hydraulic
systems associated with automotive,
industrial
and commercial products
-Manufactured to SAE J1231 |
|
|
 |
|
|
;)
;)
;)
;)
;)
;)
;)